该词条未找到_海词词典

您要查找的是不是：

Keywords spray deposition;bi-metal;plats; 喷射沉积;双金属;板材;
Keywords spray deposition;semisolid forming;solidification; 喷射沉积;半固态成形;凝固;
Keywords spray deposition;zinc-based alloy;tribology; 喷雾沉积;锌基合金;摩擦学;
Keywords spray deposition;hypereutectic Al Si alloy;divorce eutectic;solidification; 喷射沉积;高硅铝合金;离异共晶;凝固;
Keywords Spraying Deposition;ZA Alloy;Refinement;Eutectoid Structure;Pores; 喷射沉积;高铝锌合金;细化;共析组织;孔洞;
Spray deposition is a kind of complicated process affected by many parameters. 喷射沉积过程是一个多参数共同影响的复杂过程。
Spray deposition process can be optimized by studying the scanning regularity of atomizer and other process parameters. 通过对雾化器往复扫描规律以及其它工艺参数的研究,可以对喷射沉积过程进行工艺优化。
In the end, the developing direction of MMCs prepared by the use of atomized spray deposition had been summed up. 最后，总结了雾化喷射沉积法制备复合材料的发展方向。
It can be laid as request, salt spray homogeneously, Salt spray deposition can be adjusted at random. 挂壁式喷雾系统,可任意摆放,不占用有效的试验空间。盐雾分布均匀,沉降量可自由调整。
In KOH, the corrosion resistance of spray deposition ZA35 alloy is better than that of cast ZA35 alloy. 在KOH介质中，喷射沉积ZA35合金与铸态ZA35合金相比，自腐蚀电位变正，腐蚀电流减小，耐蚀性增。
Al 5.5Cu/TiAl 3 in situ composites was produced by spray deposition, and the microstructure and interfacial structure of the materials were analyzed. 采用喷射沉积工艺制备了Al?5.;5Cu/TiAl3自生复合材料，并对该材料的微观组织及界面结构进行了研究。
Plate blanks of Al8Pb4Si1.5Sn1Cu alloy were made by spray deposition process, and cladding rolling of this kind of plate with Al foil was experimented. 用雾化沉积工艺方法制备了Al?8Pb?4Si?1.;5Sn?1Cu合金板坯，并与铝箔一起进行轧制复合试验。
Spray deposition is a novel rapid solidification technique, which has been used to manufacture rapidly solidified materials with high properties. 摘要喷射沉积是一种新型的快速凝固技术，被广泛用于研究和开发高性能的快速凝固材料。
Multi layer spray deposition technology is used to fabricate aluminum/steel bimetal,and the factor of influencing the interface of aluminum/steel is discussed. 采用多层喷射沉积技术制备铝/钢双金属板,分析了其中对双金属板界面结合产生影响的因素。
The distance to the centre of mass of the spray deposit (Dc) was used to evaluate the droplets drift. 采用雾量沉积质心距D_c指标,进一步评价了因飘移作用雾量沉积分布的距离特征。
Al 2.15Li 1.28Mg 1.26Cu 0.10Zr alloy was prepared by spray deposition processing, and its tensile properties and fracture behaviour in various aging conditions were investigated. 采用新型的喷射沉积工艺制备了Al?2.;15Li?1
Yang LS, Liu YC, Yang GC, Zhou YH. Friction-wear property of high silicon ZA27 alloy prepared by spray deposition, Transactions of NFsoc 6 (1996) 105-109. 杨留栓，庞礼军，刘永长，杨根仓，周尧和.;喷雾沉积ZA27合金微滴热过程物理模型与数值分析，粉末冶金技术，13（1995）163-169
Keywords Spray inhalator;Sterilization;Bacteria; 雾化吸入器;消毒;细菌;
Keywords spray drying;fogdrop;wall sticking; 喷雾干燥;雾滴;粘壁;
Keywords ：spray;polyurea;green materials; 喷涂;聚脲;绿色材料;